LPC2294 ARM Development Board with USB, 4x CAN, RS232, Ethernet, USB, 128×128 TFT LCD and SD/MMC card connector. This board has 8MB external RAM and 2MB Flash Program Memory.

Note: The picture on the right shows this board with a 2x16 character LCD. The version you order from this page comes with a 128x128 pixel color TFT LCD.

LPC2294 ARM Board Features

• MCU: NXP LPC2294 16/32 bit ARM7TDMI-S with 256K Bytes Program Flash, 16K Bytes RAM, external memory bus, RTC, 4x 10 bit ADC with 2.44 uS conversion time, 2x UARTs, 4x CAN, I2C, SPI, 2x 32bit Timers, 7x CCR, 6x PWM, Watchdog Timer, 5V tolerant I/O and up to 60MHz operation
• 8MB (2 M x 32bit) 70ns K1S321611C External PSRAM
• 2MB (256Kx16bit) 70ns TE28F160C3BD70C3 External Intel Flash
• 2x10 pin ARM JTAG connector for programming/debugging with ARM JTAG In-Circuit Debuggers & Programmers
• Optional TRACE connector (not assembled)
• Nokia 6610 TFT 128x128 12-bit color LCD with backlight
• SD/MMC card connector
• USB to serial UART converter; board can be powered from USB bus. Note: The power supplied from the USB bus may be insufficient during programming of the board's Flash memory. It is recommended that you power the board with an external power supply during programming/in-circuit debugging.
• RS232 driver and connector
• Ethernet 100Mbit with DM9000E
• 4x CAN drivers and connectors
• UEXT connector (see below)
• RESET circuit with external control of Philips ISP utility via USB-RS232 virtual port
• Jumpers for boot select from external memory
• Jumpers for ISP/RUN mode
• 2 Push Buttons
• Potentiometer connected to AIN0
• I2C 24LC515 EEPROM on board
• Two on-board voltage regulators 1.8V and 3.3V with up to 800mA current

Add-on UEXT Modules Available

LPC2294 ARM Board Resources

• LPC-E2294 User Manual
• LPC-E2294-8MB Schematic (rev. C)
• LPC-E2294-8MB test software and basic routines for access to the external Flash/SRAM
• Ethernut OS port for LPC-E2294 made by Michael Fischer
• Adam Dunkel's open source uIP web server ported for IAR EW-ARM compiler
• OpenOCD + Eclipse set of projects 1.00 includes Flash write makefile for LPC-E2294. See the complete list of projects included here.