This nRF2401A module has the same minimum interface of seven pins (all in a 0.1" spaced connector) as the original nRF2401A module, but the size is reduced by over 60%. It features the nRF2401A 2.4GHz transceiver module with built-in chip antenna designed around the Nordic Semiconductor nRF2401A with high sensitivity and range. The board comes with an empty 0.1" spaced footprint ready for a straight header, right-angle header (recommended), or your own wires/umbilical cable. The following pins are broken out: - VCC: 3.3V
- CE: Chip Enable
- CS: Chip Select
- DR1: Data Ready Channel 1
- CLK: Clock Input
- DAT: Data I/O
- GND: Ground
Specifications: - Frequency: 2.4~2.524 GHz
- Modulation type: GFSK
- Operating Voltage: 3V
- Output Power: +0dBm
- Data Rate: 1Mbps and 250Kbps
- Miniscule footprint size: 0.5x0.675" (13x17mm)
- Operating Temperature: -40 ~ +85 C
- Long range:
- 50ft. indoors
- 125ft. line of sight
- Built-in 2.45GHz ceramic antenna
- Very low cost
Documents: Software: Example PIC Code for 4-byte payload and 29-byte payload
Optional Recommended Products for this Item
|
