USB In-System Programmer (ISP) for Atmel AVR microcontrollers. Includes JTAG adapter. AVR USB Programmer Features - Programmer powered by USB bus
- Conforms to USB power requirements, including sleep
- Supports USB v1.1 protocol and USB v2.0 compatible
- Direct USB drivers -- not virtual serial port
- Microsoft approved drivers for real plug and play
- Supports Win 98SE/2000/XP/ME
** Win 95 and early Win98 require Microsoft USB update - Programs target devices from 1.8V to 5V
- Multiple programmers from one PC
- Uses Kanda's industry standard 10-pin IDC box ISP header
- JTAG programming option and adapter
- Automatic program start on insertion
The enclosed adapter lets you use the JTAG programming algorithm with this AVR USB programmer. JTAG programming works with newer AVR ATmega microntrollers with 40 pins or more, and it is much faster than serial programming. Of course, the adapter does not make on-chip debugging possible; you will need an actual AVR In-Circuit Debugger to do that. USB AVR Programmer Software Features - Simple install and detection of each programmer
- Multiple programmers can be operated from a single PC screen or multiple screens
- Select ISP or JTAG from down-down list
- Full Fuse and Lockbit support on user-friendly screen
- Color-coded Flash and EEPROM buffers can be edited in Hex and ASCII
- User-defined serial numbering in AVR Flash or EEPROM
- Comprehensive Check Sum support CR16/32, XOR 16/32
- Flexible Auto-program options
- Pop-up Reset on Error feature prevents errors being ignored - can be disabled
- Plug and Program mode - programmer starts automatically when new AVR microcontroller is detected, if this mode is set
- Clock Source screen uses clock type -- not Fuse bits -- for ease of setting correct clock
- Support for binary files as well as Intel Hex, Motorola, etc.
USB AVR Programmer Kit Contents - AVR Programmer unit - 66 x 66 x 28mm (2.6 x 2.6 x 1.1 inches)
- 1.8m USB A (PC or Hub) to USB B (Programmer) cable
- 1m programming lead with 10-way target interface
- Software CD
- JTAG interface adapter
- Supplied in VHS case
AVR Device Support Using ISP Interface - AT90S1200, AT90S2313, AT90S2323, AT90S2343, AT90S4433, AT90S4414, AT90S8535, AT90S8515
- ATmega16, ATmega161, ATmega162, ATmega163, ATmega164, ATmega165, ATmega168, ATmega169
- ATmega32, ATmega323, ATmega324, ATmega325, ATmega3250, ATmega329, ATmega3290
- ATmega48, ATmega88, ATmega8, ATmega8515, ATmega8535
- ATmega64, ATmega644, ATmega644P, ATmega645, ATmega6450, ATmega649, ATmega6490, ATmega640
- ATmega103, ATmega128, ATmega1280, ATmega1281, ATmega2560, ATmega2561
- ATmega16M1, ATmega32M1/C1, ATmega64M1/C1
- ATmega8U2, ATmega16U2, ATmega32U2
- ATmega16U4, ATmega32U4, ATmega32U6
- ATtiny12, ATtiny15, ATtiny22, ATtiny26
- ATtiny13, ATtiny2313, ATtiny24, ATtiny25, ATtiny44, ATtiny45, ATtiny84, ATtiny85
- ATtiny48, ATtiny88, ATtiny87, ATtiny167, ATtiny43U
- AT90CAN32, AT90CAN64, AT90CAN128, CANDIPM162, CANDIP8515, AT90PWM2/3, AT90PWM316
- AT90PWM2B/3B
- All Low voltage AVR devices are supported down to 1.8V
- All P (PicoPower) AVR microcontrollers are supported. Select same standard device e.g. for ATmega169P, select ATmega169
Using JTAG interface - ATmega16, ATmega162, ATmega164P, ATmega165, ATmega169
- ATmega32, ATmega324P, ATmega325, ATmega3250, ATmega329, ATmega3290
- ATmega64, ATmega128, ATmega1280, ATmega1281, ATmega2560, ATmega2561
- ATmega645, ATmega6450, ATmega649, ATmega6490, ATmega640, ATmega644, ATmega644P
- AT90CAN32, AT90CAN64, AT90CAN128
Ships from: USA
Leadtime: In Stock
Optional Recommended Products for this Item
|
