The DX300 is a replacement for the obsolete DX160 Serial Graphic LCD. It features a 32MHz MCU (vs 8MHz in the DX160), automatic baudrate detection, support for up to 256,000 baud, and has two additional large fonts. It also adds adjustable backlight brightness. Serial Graphic LCD Features - 3x6 small font (proportional font, uppercase only)
- 5x8 large font (proportional font)
- 2 types of BIG font (about 0.60 in. tall, fixed font, numbers and “:” only)
- 128x64 pixel graphics
- Easy to use -- simple decimal commands
- Display up to 5 full-screen bitmaps per second
- Only 3 lines needed -- 5V power, ground and signal input
- Compact size -- 3.0 in. wide by 2.1 in. tall (0.58 in. thick)
- Automatic baud rate selection from 9,600 to 256,000
- Standard RS-232 or TTL level signals
- Software-controlled LED backlight; 255 brightness levels
- Blue transmissive LCD with white backlight
- Surface-mount controller board
 Serial Graphic LCD Specifications - Size: 3.0" x 2.1" x 0.58" (75mm x 53mm x 14.5mm)
- Power: 5V (+/- 5%) regulated supply; 15mA (backlight off); 80mA (backlight on)
- Baud: 9600 to 256000, no parity, 8 data bits, 1 stop bit
Serial Graphic LCD Resources Serial Graphic LCD User Manual Visual Basic Demo code (intended for DX160)  
|
