The BLC877A consists of the SBC44B fully assembled Single Board Computer with a 20MHz crystal and a PIC16F877A microcontroller. The PIC is programmed with the free bootloader from Microchip.
No special programming hardware is required to get your code working this board. All you'll need is a 9-pin serial port on your PC and a Sub-D female-female 9-pin cable.
Note: The Serial Null Modem Cable DB9 F/F is not included in this package, but is required to use the bootloader unless you make your own cable. This six-foot cable has a 9-pin Sub-D female connector on both sides. The cable connects to the Sub-D female connector on this PIC board. You may add the cable to your order using the option box below.
PIC ICSP Board Connector to DIL Adapter Set, In-Circuit Programming Adapter Set for connecting this PIC board's ICSP connector to out-of-circuit PIC chip programmers with a DIP/ZIF socket.
PIC ICSP Adapter, 6-pin Single Row to RJ12 and 2mm 2x4 Header, In-Circuit Programming Adapter for connecting this PIC board's ICSP connector to the debuggers programmers with RJ12 jack or single row square post headers.