LPC2378 (ARM) Development Board Features

• MCU: LPC2378 16/32-bit ARM7TDMI-S with 512 kBytes Program Flash, 56 kBytes RAM (32k SRAM, 16k Ethernet, 8k USB), external memory bus, RTC, 4x 10-bit ADC 2.44 uS, 4x UARTs, 4x CAN, I2C, SPI, 2x 32-bit timers, 7x CCR, 6x PWM, WDT, 5V tolerant I/O, up to 72MHz operation
• Standard JTAG connector with ARM 2x10-pin layout for programming/debugging
• 128x128-pixel 12-bit color TFT LCD with backlight
• Ethernet 100Mbps
• MMA7620 3-axis accelerometer
• Two RS232 ports
• Two CAN drivers and connectors
• SD/MMC card connector
• Universal expansion connector UEXT (see below)
• IrDA transceiver on board
• Audio In and Audio Out jacks for microphone and headphones
• Trimpot connected to ADC
• RESET circuit with external control of Philips ISP utility via RS232 port
• Two on-board voltage regulators 3V and 5V with up to 800mA current
• Extension port connector for many microcontroller pins
• Single power supply: External power supply, USB or JTAG connector
• Battery holder and connector for the RTC
• Power supply LED
• FR-4, 1.5 mm, red soldermask, component print
• Dimensions: 135 × 101mm (5.3 × 3.98")

Add-on UEXT Modules Available

LPC2378 Development Board Resources

• LPC2378STK User Manual (schematic shows a Trace connector, but one is not included on the board)
• Jumper settings
• Sample code for EW-ARM 5.40
• Blink LED code for Eclipse/GCC
• OpenOCD + Eclipse set of projects 1.00. See the complete list of projects included here.
• Implementing PPP Connection via TCPNet (in Russian, but Google Translate actually works well on this page — just remember to grab the code examples from the original, as the translation engine will make undesirable changes to the code)