Philips LPC2103 Prototype Board, RS232, JTAG

Philips LPC2103 (ARM) Prototype Board, RS232, JTAG	US$40.95
LPC-P2103

Philips LPC2103 (ARM) Prototype Board, RS232, JTAG

LPC2103 Prototype Board Features

MCU: LPC2103 16/32 bit ARM7TDMI-S with 32 kBytes Program Flash, 8 kBytes RAM, RTC, 2x UARTs, 2x I2C, SPI, five 32-bit Timers, 8-channel 10-bit ADC, PWM, CCR, WDT, 5V tolerant I/O, up to 70 MHz operation
JTAG connector as per ARM's 2x10 pin layout, for programming/debugging with ARM-JTAG or other compatible devices.
Extension header for MCU pins
14.7456 MHz crystal allows easy communication setup (4x PLL = 58.9824 MHz clock)
32.768 kHz crystal
RS232 interface circuit
User button
Status LED
Power supply LED
Socket for RTC backup Li-ion battery
RESET circuit
RESET button
DEBUG jumper to enable/disable JTAG
BSL jumper to enable/disable bootloader
RTCK pull-up resistor
Power jack for 6V AC or 9V DC supply
Two on-board voltage regulators: 1.8V and 3.3V up to 800mA
Power supply filtering capacitor
UEXT universal extension connector (see below)
PCB: FR-4, 1.5 mm (0.062"), soldermask, white silkscreen component print
Dimensions: 100 x 80 mm (3.9 x 3.15")
Four mounting holes

UEXT Connector

This board has a universal expansion connector, UEXT, which allows you to control external devices via the ARM microcontroller on this board. The UEXT can provide I2C, RS232, SPI and power to the external device. Boards that can be connected and controlled via UEXT include:

Each of those boards comes with a cable for connection.

LPC2103 Prototype Board Resources

LPC-P2103 Schematic

This prototype board is a low-cost tool with limited support. It does not ship with any documentation or software.

Ships from: USA
Leadtime: In stock

Optional Recommended Products for this Item

Serial Cable, 6ft., DB9 M/F	+	US$6.00
MP3 Player Module with VS1002 MP3 Decoder/Encoder	+	US$40.95
RF 2.4GHz Transceiver Module with NRF24L01, 125 RF Channels	+	US$25.95
3-Axis Acclerometer Board, 2/4/8 g, 25-1500Hz	+	US$29.00
Power Supply 3-12V DC, U.S. plug, 6 connection tips	+	US$11.00
Power Supply 3-12V DC, US/UK/Euro/AU Plugs, 100-240VAC	+	US$13.00

This product was added to our catalog on Friday 16 June, 2006.

Customers who bought this product also purchased

Prototype Board for 40-pin AVR, with USB, JTAG and ICSP	$31.95
NXP LPC2378 (ARM) Development Board, RS232	$129.95
Philips LPC2148 (ARM) Prototype Board, USB, Dual RS232	$76.95
ARM JTAG Debugger & Programmer, USB 2.0, OpenOCD	$51.95
Philips LPC2148 (ARM) Header Board, USB, JTAG	$40.95
RF 2.4GHz Transceiver Module with NRF24L01, 125 RF Channels	$25.95