The MSP430-JTAG-ISO can be connected to high-voltage target systems for in-circuit programming, Flash emulation and debugging of all MSP430Fxxx Flash microcontrollers. It provides up to 1000V DC insulation, and contains 64 kB internal Flash memory so you can use it for programming of remote devices without the need to carry a PC or laptop with you. (Does not support the new devices with an X designation for standalone programming.) MSP430 Hand-Held Programmer Features - Program all MSP430Fxxx Flash microcontrollers
- Ultra-fast 13KB/s JTAG programming -- several times faster than TI-USB-FET
- 1.3KB/s Spy-Bi-Wire programming
- Uses TI standard 2x7-pin JTAG connector (top view, connector on PCB)
- Can blow the MSP430 JTAG security fuse
- Opto-isolation 1000V DC; target circuit can be high-voltage powered (electricity meters safe debugging)
- Can supply target with variable voltage
- 64 kB Internal Flash -- can work stand-alone (with external power supply +12V DC, positive inner)
- Can work without computer for in-field firmware upgrades
- MSP430.dll makes it compatible with all existing TI-USB-FET compatible software
- Compatible with IAR Kickstart software for programming, real-time emulation, debugging, step-by-step program execution, breakpoints, memory dump, etc.
- With free IAR Kickstart you can write in assembler with unlimited code size, and in C with 4K limit for all MSP430 microcontrollers
- Works with free GCC C compiler and Insight MSP430 toolchain and debugger
- Dimensions: 90 x 50 x 20 mm (3.5 x 2 x 0.8") + 20 cm (8") cable
If your target is not powered externally, the MSP430-JTAG-ISO will power it at 3.3V. If your target is powered, MSP430-JTAG-ISO will detect and follow the target voltage. Note that your target voltage should meet Flash programing minimum voltage, otherwise you will get errors during programming. Note: Extreme care must be taken when working with the high voltage of power mains. We assume no liability for improper use of this product. Optional Programming Software The Elprotronic FET-Pro430 software can be used with this programmer. MSP430 Hand-Held Programmer Resources
Optional Recommended Products for this Item
|
