Supports MON08 and BDM interfaces. Up to 32 can be used from one PC for gang programming. The inDART-One In-Circuit Programmer/Debugger is a powerful programming and debugging tool for Freescale HC08-, S08-, RS08- S12- and S12X-based systems (view complete list of supported devices). A full-featured programming utility, DataBlaze, is included. Additionally, up to 32 inDART-One instruments can be connected (using USB hubs) to the same PC, allowing for multiple (gang) programming sessions. A specific multiple programming utility, MultiBlaze, is provided for this purpose. The device connects to target systems with a MON08 or BDM interface. HC08/S08/RS08/S12/S12X Programmer/Debugger Overview inDART-One ships with the CodeWarrior Development Studio Special Editions for the various Freescale HC08, HCS08, HCS12 and HCS12X families. CodeWarrior Development Studio is a powerful and easy-to-use tool suite designed to increase your software development productivity. Its Integrated Development Environment (IDE) provides unrivaled features such as Processor Expert application design tool, full chip simulation, Data Visualization and project manager with templates to help you concentrate on the added value of your application. Full-speed program execution allows you to perform hardware and software testing in real time. Programming Library Included inDART-One can be fully controlled via the provided IPL-One Programming Library. The IPL-One Programming Library is a DLL which includes all of the low-level functions that allow you to set up the instrument and perform all of the programming commands and functions of the DataBlaze and MultiBlaze programming utilities from within your own Windows application. The IPL-One Programming Library contains C written routines, and can be used to operate the instrument from within, for example, a Microsoft Visual C or Visual Basic application, as well as any other programming language that supports the DLL mechanism.  HC08/S08/RS08/S12/S12X Programmer/Debugger Features Main Features - In-circuit debugging
- Real-time code execution
- Built-in Flash programmer
- In-circuit programming and debugging through standard BDM- and MON08-compatible interfaces
- VDD In and VDD Out connectors for target power supply handling (automatic or manual)
Operating Features - Working frequency up to the target microcontroller's maximum
- All target microcontroller voltages supported
- Jumperless hardware mode setting
- Powered by the USB connector
CodeWarrior Development Tools - Editor
- Assembler
- C Compiler (32 KB limited for HCS12 and HCS12X, 16 KB limited for HC08 and HCS08)
- Linker
- Source-level and symbolic debugger
Debugging Capabilities - Reset, Start, Stop, Single Step, Step Over, Step Out
- Hardware breakpoints (number varies depending on device)
- Trace (on some devices)
- Full handling of target's on-chip debug peripheral
- Real-time refresh of RAM, variables, registers and peripherals
Programming Capabilities - Blank check, erase, program, read, verify, oscillator trimming
- Single programmer (through the DataBlaze interface)
- Gang programmer (through the MultiBlaze interface)
- Optional ultra-fast programming algorithms
Optional HC08 Fast Programming Algorithms Fast HC08 programming algorithms are available optionally. These significantly reduce the amount of time needed to program HC08 devices. Fast programming algorithms can be used both in single and multiple programming, and can be used in debugging as well. The table below shows programming times for some HC08 devices when using the Fast Programming Algorithms. | Device | Mem Size | Programming Times | | MC68HC908GP32 | 32KB
fCPU=4MHz | Program = 1.5s
Program + Verify = 2.9s | | MC68HC908QB8 | 8KB
fCPU=4MHz | Program = 1.1s
Program + Trim + Verify = 1.5s | | MC68HC908AZ60A | 60KB
fCPU=4MHz | Program = 2.7s
Program + Verify = 5.4s | Although each HC08 Fast Algorithms License is tied to a specific programmer's serial number, it will apply automatically to all inDART-One units connected on the same PC as the licensed unit, so you need purchase only one license per PC regardless of how many inDART-One units are connected, provided that the licensed unit always is connected. HC08/S08/RS08/S12/S12X Programmer/Debugger Maintenance Program The inDART-One Maintenance Program is included for one year from the date of purchase, and may be extended after that time. This allows you to keep your unit up to date with regards to programming newly supported devices in all of the supported device families (with DataBlaze, MultiBlaze, or the IPL-One DLL). Debugging support for new devices (with CodeWarrior) is always free of charge even if the Maintenance Program expires. HC08/S08/RS08/S12/S12X Programmer/Debugger Resources View list of supported devices
Download User Manual (PDF file, 1.2MB) Country of Origin: Italy
|
