This board allows you to add the functions of an Oki ML67Q5003 microcontroller to your project. The processor module sockets on the ML67 Development Motherboard are designed to accept this board. ML67Q5003 Header Board Features - Oki ML67Q5003 ARM7TDMI 16/32-bit RISC CPU
- 16MB SDRAM (8MB x 16 bit) 7.5 ns / 166 MHz (can run uClinux)
- 8MB Flash (4MB x 16 bit) 80 ns (enough to store uClinux boot image)
- 512kB SRAM (256kB x 16 bit) 10 ns
- 7.5 MHz crystal oscillator (PLL=4: 60 MHz)
- Standard JTAG connector with ARM 2x10 pin layout for programming/debugging (such as with ARM-JTAG)
- USB-RS232 converter connected to UART0
- Status LED
- RESET supervisor IC and button
- IDC34 extension connectors for all MCU ports
- Power supply can be from USB port or external
- Power supply LED
- 8-position slide switch for MCU configuration
- PCB: FR-4, 1.5 mm (0.062"), green soldermask, white silkscreen component print
- Dimensions: 100 x 65 mm (3.9 x 2.5")
Oki ML67Q5003 Overview - ARM7TDMI 16/32-bit RISC CPU core
- 512kB internal Flash
- 32kB internal SRAM
- 8kB cache memory
- Built-in external memory controller supports external SRAM, SDRAM, EDO DRAM, Flash
- 28 interrupt sources
- 2-channel DMA with external access
- Seven 16-bit timers
- Dual-stage 16-bit Watchdog timer
- PWM: Two 16-bit channels
- Serial Interfaces: SIO, UART, USART, I2C
- 42-bit GPIO
- Four-channel, 10-bit A/D converter
- Built-in boot ROM accommodates in-circuit Flash ROM reprogramming and field updates
ML67Q5003 Header Board Underside View
ML67Q5003 Header Board Resources Ships from: USA
Leadtime: In stock
Optional Recommended Products for this Item
|
