48-pin All-in-One Chip Programmer, emulator and logic analyzer with USB interface. Includes in-circuit programming adapter.

All-in-One Programmer/Emulator/Analyzer Features

• 48-pin ZIF socket with universal pin drivers
• No additional adapter required for DIP devices
• FPGA-based microcontroller for fast programming
• Supports over 6000 devices: EPROMs, EEPROMs, Flash, MCUs, PLDs, etc.
• Device insertion and pin-contact check
• Supports standard 5V and low-voltage devices up to 1.8V

• In-circuit programming connector
• Built-in universal IC tester
• 8/16-channel, 80/40 MHz logic analyzer
• Built-in 8/16-bit Flash/EPROM emulator
• Auto Run button for continuous programming
• Short programming and verification times
• Universal adapters available for PLCC, SOIC and TSOP devices up to 48 pins
• USB interface for PC
• Supports Windows 95/98/NT4/2000/XP
• Free technical support and software updates from the Internet
• Full one-year warranty

Logic Analyzer Features

Data may be captured on 8 channels simultaneously with internal sampling frequency max. 80 MHz, or on 16 channels at 40 MHz. An external clock source also may be used. Capture from trigger mode allows the use of an external frequency generator other than what is listed in the software, e.g. the oscillator of a microcontroller. Capture immediate mode is very useful for bus transmission analysis. In this case, the bus control signals (RD, WR) can be used as the clock source. Captured samples can be analyzed in the Text Display window.

Ulogic uses the programmer's internal memory as a data buffer which is divided into pre- and post-trigger sections. Both parts of the buffer display data captured before and after trigger conditions. The adjustable size of the pre/post-trigger buffers allows you to analyze signals before and after trigger occurrence.

The trigger occurs when a specific pattern or edge is valid. All trigger options can be set easily. Many combinations are available: rising or falling edge, specified pattern or combinations of edge and pattern. Trigger can be also forced by the user. Three capture modes can be set: single, to perform one single capture; continuous (conditional), for viewing continuously changing data; and continuous (unconditional), to capture data continuously without waiting for a trigger. Other features, like capture delay, are also available. Captured data can be saved to a file.

The easy-to-use and flexible software displays captured data. Any number of channels can be displayed, and the name of any channel can be changed. Three cursors are available for time/frequency measurements. Zoom options, jump-to-cursor buttons and scrollbar in connection with cursors make data analyzing very easy. Data patterns may be searched for and displayed in text format (binary and hexadecimal).

Logic Analyzer Features Summary

• 16 or 8 channels
• 80 MHz sampling rate with 8 channels; 40 MHz with 16 channels
• Buffer length: 128kB (512kB with memory upgrade)
• Short data transfer time: 128kB below 1 sec.
• External clock input
• Flexible trigger settings: edge, level (pattern) or combination of edge and/or pattern
• Pre-trigger and Post-trigger buffer
• Capture delay and edge counter feature
• Input impedance: 470 kOhm

Flash/EPROM Emulator Features

• 8-bit memory sizes from 8kB to 128kB (to 512kB with 512kB memory upgrade option; see below)
• 16-bit memory sizes from 8kB to 64kB (to 256kB with 512kB memory upgrade option; see below)
• Short loading time: 128kB in 1 second
• Short access time: 10ns for 8-bit; 70ns for 16-bit
• Reset after data load complete
• Variable voltage level: 2.7V to 5V

Package contents

• All-in-One Chip Programmer, Logic Analyzer & Flash/EPROM emulator unit
• CD-ROM with software
• In-circuit programming cable
• Emulation cable with connectors
• Logic analyzer board with 2x8-channel cable and grabbers
• USB cable
• Programmer's manual

Download Supported Devices List