The mikroBoard modules are designed to plug into the UNI-DS6 universal development system, but they also can be used standalone.
This board includes a Cypress CY8C27643 microcontroller in 48-pin SSOP soldered, and an on-board fast PSoCprog in-system programmer with a mini-USB connector. It also has a prototyping area where you can connect your own circuit.
mikroBoard PSoC Features
- On-board fast PSoCprog programmer
- mini-USB programmer connector
- Specialized reset circuit
- CY8C27643 MCU from Cypress
- 5V power regulator circuit
- Power and USB link LEDs
- Prototyping section
- On-Board crystal oscillator
- Can be used as a standalone device
mikroBoard as MCU card The main purpose of the mikroBoard is as an MCU card for the UNI-DS6 development system. For connection with the UNI-DS6, the mikroBoard has two 2×40 female headers. Integrated into the mikroBoard is a programmer which is used for MCU programming. To connect the on-board programmer with a PC, just plug in a mini-USB cable.
mikroBoard as standalone device To use mikroBoard as standalone device, it is necessary to place jumper J1 (STANDALONE). In standalone mode, mikroBoard can get power from a PC via USB or through the 2×40 female header. When power is supplied to the 2×40 female header, it must be a regulated 5V supply.
mikroBoard for PSoC User Manual mikroBoard for PSoC Software Examples PSoCprog2 Programming Software for Windows PSoC Programmer Drivers