The BASIC Stamp 2sx serves as the brains inside of electronics projects and applications that require a programmable microcontroller. It is able to control and monitor timers, keypads, motors, sensors, switches, relays, lights, and more. Programming is performed in an easy-to-learn language called PBASIC.
All vital components (processor, clock source, memory, power regulator) are provided on the BS2sx's tiny PCB; just connect power and go. Projects needing a small, permanent soldering area for circuitry may benefit from combining the BS2sx-IC with the BASIC Stamp 2 Carrier Board or the Super Carrier Board.
The BS2sx-IC is useful for those who have previous experience with the BS2 and need more speed and program space.
BASIC Stamp 2sx Module Features
- Processor Speed: 50 MHz
- Program Execution Speed: ~10,000 PBASIC instructions/sec.
- RAM Size: 32 Bytes (6 I/O, 26 Variable)
- Scratch Pad RAM: 64 Bytes
- EEPROM (Program) Size: 8 × 2 KBytes; ~4000 PBASIC instructions
- Number of I/O Pins: 16, +2 dedicated serial
- Current Draw @ 5V DC: 60mA Run, 500 µA Sleep
- Source/Sink Current per I/O: 30 mA / 30 mA
- Source/Sink Current per unit: 60 mA / 60 mA per 8 I/O pins
- 45 PBASIC Commands
- Package: 24-pin DIP
- Power Requirements: 5.5V to 12V DC (Vin), or 5V DC (Vdd)
- Communication: Serial (9600 baud for programming)
- Dimensions: 1.20 × 0.63 × 0.15 inches (30.0 × 16.0 × 3.81 mm)
- Operating Temperature: -40 to +185 °F (-40 to +85 °C)
BASIC Stamp Overview A BASIC Stamp microcontroller is a single-board computer that runs the PBASIC language interpreter in its firmware. Your code is stored in an EEPROM, which can also be used for data storage. The PBASIC language has easy-to-use commands for basic I/O, like turning devices on or off, interfacing with sensors, etc. More advanced commands let BASIC Stamp modules interface with other integrated circuits, communicate with each other, and operate in networks.
BASIC Stamp 2sx Module Resources