Use SMT parts on breadboards without the need for expert soldering skills! This is a pack of 10 PCBs each of which is a strip of two QFP/QFN-to-DIP adapters with a twist. These have the patented Schmartboard|ez technology to make soldering surface-mount devices easy. Your SMT part will sit in grooves that hold it in place and already have solder in them. So all you need to do is put a chip in the grooves, apply flux, and use a small enough soldering tip.
The adapters ship as two-in-one PCBs that can be snapped apart easily, creating a total of 20 individual boards:
The boards also include room for 0805 SMT components (e.g. a bypass capacitor), and pads for easy access to ground. Also, a plated hole in the center of the device area allows for the addition of solder to utilize ground pads on the bottom of the device.
- 10 for 12-pin QFN/QFP at 0.5mm pitch, 3×3mm body
- 10 for 24-pin QFN/QFP at 0.5mm pitch, 4×4mm body
Ten 40-pin male header strips are included. These strips also can be snapped apart so that you can create the individual segments needed when these boards have been separated. You can order an additional strip of pin headers using the option box at the bottom of this page.
Also available in single quantity (i.e. 2 individual adapters — 1 of each).
Optional Recommended Products for this Item