WICE-SPI can be used for in-circuit or out-of-circuit programming of SPI Flash memory devices.
The unit also can be connected directly to a circuit board via a pin adapter in place of the actual Flash memory chip and can then be used to emulate the functionality of the Flash memory chip. SPI Flash Programmer & Emulator Features The WICE-SPI provides two operating modes. - Programming Mode: In-Circuit or Out-of-Circuit
- Emulation Mode: The WICE-SPI can be connected to the circuit board in place of the actual SPI Flash memory to emulate all the functions of the Flash.
- Incorrect insertion protection
- USB bus powered.
- Four WICE-SPI units can be clustered on a PC at the same time for volume programming.
Specification | Communication | USB2.0 | | Power | By USB | | Dimension | 8.9cm X 5.0cm X 1.6cm | | Weight | 60g | | Operating Altitude | up to 5000m | | Operating Humidity | 90% (non-condensing) | | Temperature | +5°C~ 45°C | PC System Requirement | Operating System | Windows XP / Vista 32 | | Processor | Pentium VI and above | | Memory | 512MB RAM and above | | Hard Disk | 30MB and above | SPI Flash Vendors Supported AMIC, ATMEL, APLUS, cFeon (EON), ESMT, EXCELSEMI, GIGADEVICE, MXIC, INTEL, NUMONYX, pFLASH , ST, SST, SPANSION, WINBOND,TSI etc. Performance | Density | 4Mb | 8Mb | 16Mb | 32Mb | 64Mb | 128Mb | | Program | 3.77s | 4.81s | 7.98s | 16.59s | 35.77s | 66.86s | | Verify | 0.81s | 1.58s | 3.11s | 6.20s | 12.36s | 24.70s | | Program+Verify | 4.58s | 6.39s | 11.09s | 22.79s | 48.13s | 91.56s | SPI FLASH Programmer Package Contents - 1x Main Unit SPI Flash Programmer & Emulator
- 1x Socket board with DIP 28 ZIF socket
- 1x mini USB cable
- 1x 11-pin ISP split cable
- CD-ROM with USB Driver and User Manual
Downloads
|
