This is the MYC-IMX283-I CPU module that is included in the MYD-IMX283-I system. This version of the module has an industrial operating temperature range of -40 to +85 °C.
It contains a 454MHz Freescale i.MX283 ARM926EJ-S processor, 128MB DDR2 SDRAM, 256MB NAND Flash, 128KB SPI Flash, and an on-board Ethernet PHY. The module connects to a main board via two 1.27mm-pitch 2×40-pin male headers. It comes with Linux 2.6.35 OS already installed.
i.MX283 CPU Module Features
Interfaces available via the headers include:
- Freescale i.MX283 Applications Processor with 454MHz ARM926EJ-STM core, 16KB instruction cache, 32KB data cache, 128KB on-chip SRAM, 128KB on-chip mask-programmable ROM, 1280 bits on-chip OTP ROM
- 128MB DDR SDRAM
- 256MB NAND Flash
- 128KB SPI Flash
- On-board Ethernet PHY
- Power LED (red)
- User LED (blue)
- Power Requirement: 3.3V
- Dimensions: 62 × 38 mm
- 6-layer PCB
- CPU module connects to main board via two 1.27mm-pitch 2×40-pin headers
See below for a complete pinout.
- 1x Ethernet
- 2x USB2.0 High-Speed
- Up to 6x Serial Ports (including one Debug port)
- 1x I2C
- 2x SPI
- Up to 8x ADC (one high-speed ADC; seven low-resolution ADC)
- Up to 5x PWM
- 1x SDIO
This is one of two CPU modules with the same pinout. You can swap it with the alternative MYC-IMX287-I CPU module on a compatible system (i.e. the kits in the right column below) so you can evaluate the different Freescale i.MX28x processors. The differences between the two available processors are as follows:
i.MX283 Development Board Software The same software package is provided with both available CPU modules. Some of the software drivers and examples may not apply to the i.MX283 CPU.
|OS ||Item ||Features ||Description |
|Linux ||Bootstrap ||u-boot ||Secondary bootstrap |
|Kernel ||Version ||Linux 2.6.35 |
|Drivers ||USB Host (supports both OHCI and EHCI transmission modes), USB Device (Gadget), Ethernet, MMC/SD, NandFlash, TWI (I2C), SPI, Audio (SGTL5000), LCD Controller (supports 4.3-inch, 7-inch and 10.2-inch LCD), RTC, TouchScreen (4-wire resistive), PWM, UART, CAN, Power Management Unit, LED (GPIO LED and PWM LED) |
|File System ||UBIFS ||Image file provided |
i.MX283 CPU Module Package Contents
- MYC-IMX283-I CPU Module
- DVD-ROM with schematic, user manual, BSPs and source code
i.MX283 CPU Module Resources
Ships from: China
Lead time: 1 week
Volume discount is available; please contact us.