Eddy-DK-V2.5 Development Kit with 400MHz AT91SAM9G20 (ARM9) CPU Module, 2x Ethernet, 2x USB Host, 1x USB Device, 2x RS232, 2x RS422/485, SD Card Holder, 256kBit I2C EEPROM, 2kBit SPI EEPROM, 256MB NAND Flash, I2C 16-bit I/O Expander, RTC, Temperature and Light Sensors, Dot Matrix LCD and 4x4 keypad
The Eddy Development Kit (DK) consists of one baseboard and a plug-in Eddy V2.5 CPU module. The baseboard makes the various integrated peripherals of the ARM9 CPU available via physical interface connectors. CPU module pins are accessible via expansion headers. Various additional features, such as I2C and SPI connected EEPROMs, I2C I/O Expander; light and temperature sensors connected to the MCU's A/D; Dot Matrix LCD; 4x4 keypad; and additional NAND Flash, allow you to experiment with the many features of the AT91SAM9G20 microcontroller.
Included in the DK are Linux & Windows host-operable IDE, LemonIDE API, source code and powerful testing & management utilities to minimize your development efforts.
AT91SAM9G20 Development Kit Features
Easy-to-use Windows utilities include COM Port Redirector for Automatic Serial/LAN conversion, PortView for monitoring I/O data and status, and TestView for evaluating communication performance and stability.
- LemonIDE, Eclipsed based IDE included
- All-in-one visual source code editor, compiler & debugger
- SDK including API & source code
Eclipse based IDE, LemonIDE Support LemonIDE is an integrated development environment built on the open-source Eclipse framework. It includes GNU C/C++ Compiler, a Source Code Editor and Debugger. LemonIDE provides an easy and effective GUI (Graphical User Interface) for Application and Firmware Development that run on SystemBase's embedded real-time Linux, Lemonix
SDK, API & Source Code Support Eddy can upload and execute customized user applications. To enable you to program your own socket/serial communication applications with the least amount of time and effort, the system includes an SDK (Software Development Kit), API (Application Programming Interface) and Source Code.
Windows Utility Support Utilities to monitor and test your finalized products over network and serial interfaces are provided at no cost. The SystemBase management utilities, COM port redirector, PortView and TestView utilities allow you to monitor and administer your application.
|Hardware || |
|NAND Flash ||256MB, 8bit I/F. This Flash is in addition to the memory that sits on the CPU module. |
|SD Card Connector ||Push type, Up to 16GB/12.5Mbps |
|USB Connector || 1x Device; 2x Host, Dual-port |
|LCD Module ||128 x 64 dot-matrix |
|Keypad ||4 x 4 matrix |
|Battery Holder ||3V Lithium batter, 235 mAh |
|LEDs ||Power, Ready, 20 Programmable I/O, Console & Serial TXD/RxD |
|I2C Interface ||16-bit I2C Bus GPIO; 256Kbit EEPROM |
|SPI Interface ||2Kbit EEPROM |
|MCI Interface ||SD Card, MMC Socket |
|ADC Interface ||Temp/Light Sensor |
|Digital I/O ||8-port Input, 8-port Output |
|DIP Switches ||Serial or GPIO Select; RS422/485 Select; DIO Common VCC or GND Select; Programming |
|Jumpers ||Boot Mode Select; JTAG Select |
|Serial Port ||2x RS232 DB9 Male; 2x RS422/485 Terminal Block (RS422 & RS485 selected by software) |
|Console Port ||DB9 Male |
|LAN Port ||2x RJ45 |
|JTAG Port ||2x 10-pin, 0.1" Standard ARM JTAG |
|Reset Button ||Factory Default & Warm Boot |
|Input Power ||9 to 48V DC |
|Dimensions ||240 × 180 mm |
AT91SAM9G20 Development Kit Dimensions
AT91SAM9G20 Development Kit Contents
- 1x Eddy-CPU v2.5 Module
- 1x Eddy-DK v2.5 Baseboard
- SDK/IDE/Compiler/Document/Utilities CD
- Ethernet Cable, Serial Cable, USB Cable (Type B), 12V Power Supply
Optional CPU Modules The following Eddy V2.5 modules are supported by this development kit and can be purchased separately:
Eddy V2.5 Development Kit Resources