MicroController Pros Home Page My Account  Cart Contents  Checkout  
  Store » ARM » Boards » Ethernet » MYS-7Z020-C My Account  |  Cart Contents  |  Checkout   
Quick Find
 
Enter keywords to find the product you are looking for in the Quick Find field above

or use
Advanced Search
Categories
Accessory Boards->
8051->
ADI Blackfin
Arduino->
ARM->
  Boards->
    All Boards
    ARM11
    ARM7->
    ARM9->
    Cortex-A
    Cortex-M->
    Header Boards/Modules
    Prototype Boards
    Raspberry Pi
    CAN
    Enclosure
    Ethernet
    FOX Board->
    HDMI
    IDE interface
    LCD
    Linux pre-loaded
    RS232
    RS422/RS485
    SD/MMC
    UEXT
    USB Device
    USB Host
    VGA
    Wireless
    Add-On Boards
  Books
  JTAG Debuggers->
  Programmers
  Software
  Starter & Evaluation Kits
Atmel AVR->
Cypress PSoC
Freescale->
FTDI->
Locktronics
Microchip PIC->
MIPS
Parallax->
Renesas
Silicon Labs
ST Microelectronics->
Texas Instruments->
Tibbo->
Books->
Displays->
E-Blocks->
EEPROM/EPROM/FLASH
Embedded Ethernet->
Embedded Software->
I/O Modules->
Parts & Components->
Pick & Place Tools
Programmable Logic (PLD)
Prototype PCBs->
Robotics
ROM/Flash Emulators
Test & Measurement->
Tutorial Software
Universal Programmers->
Wireless->
Information
Intro to Embedded Tools
Embedded News Digest
Useful Resources
Shipping & Returns
Warranty & Liability
Privacy Notice
Conditions of Use
Contact Us
Zynq-7020 Board, 1GB DDR3, HDMI, 1000Mbps LAN, CAN, USB (Z-turn) US$184.00

MYS-7Z020-C
Zynq-7020 Board, 1GB DDR3, HDMI, 1000Mbps LAN, CAN, USB (Z-turn)


  • 667MHz Xilinx XC7Z020 Dual-core ARM Cortex-A9 Processor with Xilinx 7-series FPGA logic
  • 1GB DDR3 SDRAM (2 512MB, 32-bit), 16MB QSPI Flash
  • USB-UART, USB2.0 OTG, 10/100/1000Mbps Ethernet, CAN, HDMI, microSD, etc.
  • On-board 3-axis Acceleration Sensor and Temperature Sensor
  • Ready-to-Run Linux Single Board Computer
  • Evaluation versions of Xylon logicCVC-ML and logiCLK IP cores (display output will cease after about 30 minutes unless full licenses are purchased)
  • Optional camera and WiFi modules; optional I/O extension cape
  • The MYS-XC7Z020 Z-turn Board is a low-cost and high-performance Single Board Computer (SBC) built around the Xilinx Zynq-7020 (XC7Z020-1CLG400C) All Programmable System-on-Chip (SoC) which features an integrated dual-core ARM Cortex-A9 processor with Xilinx 7-series Field Programmable Gate Array (FPGA) logic.

    The Z-turn Board takes full advantage of the Zynq-7020 SoC. It has 1GB DDR3 SDRAM and 16MB SPI Flash on board and a set of rich peripherals including USB-to-UART, Mini-USB OTG, 10/100/1000Mbps Ethernet, CAN, HDMI, microSD, JTAG, Buzzer, accelerometer and temperature sensor. On the bottom of the board there are two 1.27mm-pitch 80-pin SMT female connectors making available 106 user I/O configurable as up to 39 LVDS I/O pairs.

    The Z-turn Board is capable of running the Linux operating system. It is provided with a Linux 3.15.0 SDK with the kernel and many drivers in source code. The board is delivered with complete accessory kit including two USB cables, one Ethernet crossover cable, one HDMI cable, one 4GB microSD card, one 5V/2A power adapter, and a product CD-ROM which enables you to start development quickly.

    The Z-turn Board is an excellent development platform for evaluating and prototyping for the Zynq-7000 series SoC. It can also be used as a System-on-Module (SOM) for your next embedded design; typical applications are Industrial Automation, Test & Measurement, Medical Equipment, Intelligent Video Surveillance, Aerospace and Military, etc.

    Zynq-7020 Development Board Features

    • Xilinx XC7Z020-1CLG400C (Zynq-7020) with 667MHz dual-core ARM Cortex-A9 MPCore processor; integrated Artix-7 class FPGA subsystem with 85K logic cells, 53200 LUTs, 220 DSP slices; NEON & single/double-precision floating point for each processor
    • 1GB DDR3 SDRAM (2512MB, 32-bit)
    • 16MB QSPI Flash
    • TF card interface (microSD)
    • 10/100/1000Mbps Ethernet interface
    • CAN interface
    • USB-OTG interface (mini-USB)
    • USB-UART debug interface
    • HDMI interface (supports 1080p)
    • User I/O brought out to two 1.27mm-pitch 80-pin SMT female connectors: 106 user I/O; configurable as up to 39 LVDS I/O pairs
    • USB power supply or 5V @ 2A input via barrel jack
    • On-board 3-axis accelerometer and temperature sensor
    • 2.54mm-pitch 14-pin JTAG interface
    • Two buttons (one Reset; one User)
    • Four-channel toggle switch
    • Five LEDs (three User; one Power; one RGB)
    • Buzzer
    • Dimensions: 63 102 1.6 mm, 8-layer PCB design
    • Mounting holes

    Zynq-7020 Development Board Linux Software

    Item Feature Description
    Cross compiler gcc 4.6.1 gcc version 4.6.1 (Sourcery CodeBench Lite 2011.09-50)
    Boot Program BOOT.BIN First boot program including FSBL, bitstream and u-boot
    Linux Kernel Linux 3.15.0 Customized kernel for MYS-XC7Z020
    Drivers USB OTG USB OTG driver
    Ethernet Gigabit Ethernet driver
    MMC/SD/TF MMC/SD/TF card driver
    CAN CAN driver
    LCD Controller Xylon LCD driver evaluation version
    HDMI Xylon HDMI driver evaluation version
    Button Button driver
    UART UART driver
    LED LED driver
    GPIO GPIO driver
    Buzzer Buzzer driver
    G-Sensor 3-axis accelerometer driver
    Temp. Sensor Temperature sensor driver
    File System Ramdisk Ramdisk system image
    Ubuntu Desktop Version 12.04 in tarball

    Zynq-7020 Development Board Resources

    Zynq-7020 Development Board Options

    There are many optional components you can add to your order using the selectors below. The checkboxes allow you to add a USB WiFi module and/or a USB Camera module. Above that, the Expansin Module selector allows you to add either the I/O expansion board by itself, or with an LCD (4.3-inch and 7-inch sizes available). Note that the resistive touch panels are not supported on the -RV2 LCDs; there is a capacitive touchscreen available in the 7-inch LCD size that is supported, however (the -CV2 display).

    The picture to the right shows a Z-Turn board plugged into the I/O Cape. Note that pins in the I/O section are multiplexed with the LCD connector, so are available as GPIO only if not using an LCD. The ADC pins can handle differential signals, and include four I/Os of the PS unit. ADC input is 0 to 1.8V. The I/O Cape's dimensions are 102 88 mm.

    Ships from: China
    Lead time: 1 week




    Available Options:
    Expansion Module:

    Optional Recommended Products for this Item
    USB 2.0 WiFi Module, 802.11b/g/n, Up to 150Mbps+ US$25.00
    USB 2.0 Digital Camera Module, 1.3 Megapixel, Up to 1280x1024+ US$29.00

    This product was added to our catalog on Wednesday 10 February, 2016.

    Reviews

    Customers who bought this product also purchased
    USB 2.0 WiFi Module, 802.11b/g/n, Up to 150MbpsUSB 2.0 WiFi Module, 802.11b/g/n, Up to 150MbpsUS$50.00

    USB 2.0 Digital Camera Module, 1.3 Megapixel, Up to 1280x1024USB 2.0 Digital Camera Module, 1.3 Megapixel, Up to 1280x1024US$54.00

    Shopping Cart more
    0 items
    What's New? more
    Flowcode 7 "Mechatronics Pack" Feature Pack
    Flowcode 7 "Mechatronics Pack" Feature Pack
    US$42.00
    Specials more
    AT91SAM9263 (ARM9) CPU Module V1.3, 64MB RAM, 262MB Flash
    AT91SAM9263 (ARM9) CPU Module V1.3, 64MB RAM, 262MB Flash
    US$168.00
    US$79.00
    Tell A Friend
     

    Tell someone you know about this product.
    Notifications more
    NotificationsNotify me of updates to Zynq-7020 Board, 1GB DDR3, HDMI, 1000Mbps LAN, CAN, USB (Z-turn)
    Reviews more
    Write ReviewWrite a review on this product!
      Monday 11 December, 2017   List of all our Products

    Copyright © 2003-2017 MicroController Pros LLC
    Powered by osCommerce