The SBC8600B is a high-performance single board computer based on Texas Instruments' 720MHz AM3359 ARM Cortex-A8 processor. It contains a tiny plug-in core CPU board, Mini8600B, which integrates the AM3359 processor, 2×256MB DDR3 SDRAM, and 512MB NAND Flash. The core board is in combination with a carrier board to extend and provide more features through headers and connectors. The SBC8600B main board comes with a rich set of communication peripherals including six serial ports (2x RS232, 3x TTL, 1x RS485), two 10/100/1000 Mbps Ethernet ports, two USB Hosts, one USB OTG and one CAN interface. These provide an ideal solution for applications requiring remote control and monitoring or mass connectivity. The board also has LCD and touch screen interfaces, Audio input and output ports, RTC, Buzzer and other interfaces. The board can be provided with a 4.3-inch or 7-inch LCD touchscreen; see the options at the bottom of this page. The SBC8600B board is a ready-to-run solution which is provided with Linux 3.2.0, Android 2.3 and WinCE 7 BSP. A DVD-ROM is included in the package which contains the software driver source code and relative documents to help you understand this board and start your reference design. AM3359 Development Board Features - Contains Mini8600B core board with TI AM3359 ARM Cortex-A8 720MHz 32-bit RISC CPU, which has NEON SIMD Coprocessor, 32KB/32KB of L1 Instruction/Data Cache with Single-Error Detection (parity), 256KB of L2 Cache with Error Correcting Code (ECC), SGX530 Graphics Engine, and Programmable Real-Time Unit Subsystem
- 2×256MB DDR3 SDRAM (on Mini8600B CPU board)
- 512MB NAND Flash (on Mini8600B CPU board
- Input Voltage: +12V
- Audio input interface (3.5mm audio jack)
- Stereo audio output interface (3.5mm audio jack)
- TFT LCD interface / 4-line Resistive Touch Screen interface (50-pin FPC connector)
- 3-line Debug serial port, RS232 voltage (UART0 brought out to DB9 connector)
- 3-line serial port, RS232 voltage (UART2 brought out to DB9 connector)
- Three 3-line serial ports, TTL voltage (UART3/4/5 brought out to J6 and J7, 2.54mm pitch 2×5-pin expansion connectors)
- 2x USB2.0 Host ports with Integrated PHY (High-speed, 480Mbps, USB-A Type)
- One USB2.0 OTG port with Integrated PHY (High-speed, 480Mbps, Mini-USB Type)
- microSD card slot (referred to as TF card in the documentation)
- 2x Ethernet 10/100/1000 Mbps, RJ45 connectors (WinCE supports only one)
- CAN2.0 interface (brought out to 8-pin Phoenix connector)
- RS485 interface (brought out to 8-pin Phoenix connector)
- GPMC Bus interface
- Reset button
- Two User buttons (MENU and BACK)
- Power indicator LED
- Two User LEDs
- Buzzer
- Main Board Dimensions: 96 × 96 mm (6-layer PCB design)
- CPU Board Dimensions: 60 × 27 mm (8-layer PCB design)
- Temperature Range: 0 to 70 °C
- Humidity Range: 20% to 90%
AM3359 Development Board Optional Add-ons The image to the right shows the board's interfaces, including where optional peripherals can connect (the microSD slot is on the bottom side of the board). The following hardware options are available in addition to the LCDs already mentioned. Source code is included for all supported items. Note: Use the checkboxes at the bottom of this page to add these items to your order at a discounted bundle price. Item | Description | Interface | Linux Support | Android Support | WinCE Support | VGA8000 | VGA Module | LCD | Yes | Yes | Yes | WF8000-U | WiFi Module | USB Host | Yes | No | No | CDMA8000-U | 3G Module (CDMA2000) | USB Host | Yes | No | No | WCDMA8000-U | 3G Module (WCDMA) | USB Host | Yes | No | No | CAM8100-U | Digital Camera Module | USB Host | Yes | No | No | LVDS8000 | RGB-to-LVDS Module | LCD | Yes | Yes | Yes | AM3359 Development Board Software The SBC8600B Single Board Computer is provided with Linux 3.2.0, Android 2.3 and WinCE7 BSP, with plenty of drivers, many of which are in source code. Please refer to the following table. OS | Item | Remarks | Linux | BIOS | SPL (First boot loader) | NAND | MMC/SD | FAT | U-boot (Second boot loader) | NAND | MMC/SD | FAT | NET | Kernel | Linux 3.2.0 | Supports ROM/CRAM/EXT2/EXT3/FAT/NFS/ JFFS2/UBIFS file systems | Drivers | NAND Flash, SDRAM, Serial port, RTC, Ethernet, TFT LCD, Touch screen, TF card, USB OTG, Audio input/output, LED, Key, CAN, RS485, Power Management (backlight, PWM, ADC) (All provided with source code) | 2D/3D (Source code not provided) | Android | Kernel | Linux 3.1.0 | Gingerbread | Drivers | NAND Flash, SDRAM, Serial port, RTC, Ethernet, TFT LCD, Touch screen, TF card, USB OTG, Audio input/output, LED, Key, Power Management (backlight, PWM) (All provided with source code) | 2D/3D (Source code not provided) | WinCE 7 | BIOS | X-loader (First boot loader) | NAND | MMC/SD | FAT | EBOOT (Second boot loader) | NAND | MMC/SD | FAT | NET | OAL | OAL module | Boot parameter | KILT (EMAC) | Serial debug | REBOOT | Watchdog | RTC | Kernel profiler | System timer | Interrupt controller | MMU | Drivers | NAND Flash, SDRAM, Serial port, RTC, Ethernet, TFT LCD, Touch screen, TF card, USB OTG, Audio input/output, LED, Key, RS485, Power Management (backlight) (All provided with source code) | CAN, 2D/3D (Source code not provided) | AM3359 Development Board Resources AM3359 Development Board Package Contents - SBC6800B Board including Mini8600B CPU module
- 12V power adapter
- Cross serial cable
- Ethernet cable
- DVD-ROM with user manual, schematics, datasheets, Linux/Android/WinCE BSPs and drivers
You can select an LCD with touchscreen below. The part number that will show on your invoice will change depending on your selection: T6010237 with no LCD, T6010238 with 4.3-inch LCD, or T6010239 with 7-inch LCD. Ships from: China Lead time: 4 weeks
Available Options:
LCD Display: |
|
Optional Recommended Products for this Item
|