The KIT2416 ARM9 development board is based on the Samsung ARM9 S3C2416 microprocessor. It has a clock speed of 400MHz, and contains a 2D graphics acceleration video card which supports common graphics acceleration function such as DirectDraw and GDI. The video card supports up to 1024×768 pixels resolution. The S3C2416 supports both MLC and SLC Nandflash memory. It also supports booting from SD, USB, OneNand, Norflash and Nandflash, to speed up the debugging and development. The installed CPU board integrates the S3C2416 ARM9 CPU, 64MB Mobile DDR SDRAM, 1GB MLC Nandflash, 10/100M ethernet control chip (SMSC LAN9221) and an AC'97 audio control chip (WM8731). The CPU board size is 40mm × 40mm × 8mm. It's soldered onto the mother board. The mother board integrates very rich interface resources for redevelopment, including VGA interface, PS/2 keyboard interface, RS232, RS485, CAN bus, 100M ethernet RJ45 interface, LVDS interface, TFT-LCD interface, parallel printer port, digital I/O interface, etc. The drivers and the development cases in WinCE5.0 and Linux 2.6 will help with updating and replacing products quickly. The development board has passed high and low temperature testing, to suit a variety of industrial applications. S3C2416 Development Board Features - CPU: Samsung ARM926EJS S3C2416, 400MHz industrial frequency
- 64MB DDR2 SDRAM
- 1GB MLC NandFlash
- Built-in 2D graphics acceleration video card; resolution is up to 1024×768
- Supports 4x RS232 DB9 Ports; 1x RS485 Port
- Supports 4-line touch screen
- Supports VGA output (VGA connector pictured is not included by default; see options below)
- Supports PS/2 keyboard (must write your own driver)
- Parallel printer port (must write your own driver)
- CAN 2.0 bus interface (must write your own driver)
- SD 2.0 and 1-way MMC4.0
- Supports booting from Nandflash and SD
- Customizable boot logo
- Integrated package service (development board + data + LCD)
- Operating Systems: WinCE 5.0 and Linux 2.6
Hardware Specifications | CPU board | | CPU | S3C2416 -- ARM926EJ, 400MHz | | DDR2 | 64MB | | Nand Flash | 1GB Nandflash | | 2D | Supported in CPU | | Mechanical Properties | | Board size | 161.93mm x 111.13mm x 15mm | | Test point | Internal | | Electrical Properties | | Input voltage | +9V ~ 24V @ 500mA (not including LCD) | | Power | 300mA ~ 350mA | | Operating temperature | -10 ~ +65 degrees C | | Storage temperature | -20 ~ +75 degrees C | | Interface | TFT LCD
LVDS | 32-bit true color; supports resolutions from 320x240 ~ 1024x768
Supports 1024x768 resolution w/ LVDS interface | | LAN | 10/100M adaptive RJ45 LAN interface | | PS/2 * | PS/2 keyboard interface | | CAN 2.0 * | CAN 2.0 interface | | Touch | 4-wire touchscreen support | | USB 2.0 | USB 2.0 Host interface and USB Device interface | | Audio codec | I2S audio interface | | SD/MMC | SD card slot | | RS232 | Four RS232 UART interfaces | | RS485 | One RS485 interface | | Parallel * | One parallel interface for printer | | VGA | One VGA interface; 1024x768 resolution
VGA connector optional; see below | | PWM | Two PWM interfaces | | GPIO | 30 GPIOs |
* Hardware supports these functions but the software/firmware does not. You would have to write your own drivers to use these functions. Software Specifications | OS | Item | Feature | Description | | Linux2.6.21 | Bootloader | u-boot | u-boot-1.3.4
Main functions:
Supports Nand Flash erase/write/read
Supports net download image
Supports print, set, save environment variables
Supports bootm, bootargs setting | | Sdboot | SD card boot-up and download Image via NET (can replace JTAG) | | Image update | Supports updating image from SD card or NET | | Kernel and drivers | Version | Linux 2.6.21 | | File system Format | ROM/CRAM/EXT2/EXT3/FAT/NFS/JFFS2/YAFFS2 | | Drivers | Serial ports, RTC, Ethernet, 3.5”, 4.3” and 7” LCD including Touch Screen, MMD/SD, USB Host, LEDs, AC97, Nand Flash | | File System | File System | Yaffs File System | | Function | Provided Lib (ALSA -lib, tslib, glibc), udev support | | Embedded GUI | Qt/Embedded | Qtopia 2.2.0 | Network protocol
& application | Network Protocol | TCP/IP, Telnet, FTP, Boa Web server, Remote login (telnet) | | Cross-compiler Environment | cross-4.2.2-eabi | | WinCE5.0 | Boot | | Source code and STEPLDR.bin provided | | Eboot | Source code and EBOOT.bin provided
Eboot main functions:
Supports SD card update image
Format Nand Flash
Format BinFS
Low-level Format
Update boot logo | | Image update | Supports updating image from SD card | | System | Characteristics | Reboot, Watchdog, RTC | | Drivers | 4.3", 5.6", 7", 10.4" LCD including Touch Screen | | SD card, AC97, Ethernet, USB Host, USB OTG, Serial ports, RTC, 2D Accelerator, POWERBUTTON, SERIAL Driver, audio, LED, IIC | | Test program | Mediaplayer | | Serial test program | | Activesync | | SD/HSMMC test | | Net test | | Media Player 9.0, Word and Internet Explorer 6.0 | Block Diagram  PCB Diagram  S3C2416 Development Board Package Contents - KIT2416 board with soldered CPU board and LCD of your choice if selected (see below)
- CD-ROM with WinCE 5.0 BSP, Linux BSP, documentation, software tools, schematic and datasheets
- Serial cable
- USB cable
- Ethernet crossover cable
- 9V, 2A power supply
- SD card
LCD Touchscreen Options Please use the option selector below to select a 4.3-inch or a 7-inch TFT touchscreen LCD to be included with this board. Ships from: China
Lead time: 1 week
Available Options:
| LCD Display: |
| | VGA Connector: |
|
|
