MicroController Pros Home Page My Account  Cart Contents  Checkout  
  Store » ARM » Boards » ARM9 » RS232 » PAC-5070 My Account  |  Cart Contents  |  Checkout   
Quick Find
 
Enter keywords to find the product you are looking for in the Quick Find field above

or use
Advanced Search
Categories
Accessory Boards->
8051->
ADI Blackfin
Arduino->
ARM->
  Boards->
    All Boards
    ARM11
    ARM7->
    ARM9->
      Header Boards/Modules
      Prototype Boards
      CAN
      Enclosure
      Ethernet
      LCD
      RS232
      RS422/RS485
      SD/MMC
      USB Device
      USB Host
      VGA
      Wireless
    Cortex-A
    Cortex-M->
    Header Boards/Modules
    Prototype Boards
    Raspberry Pi
    CAN
    Enclosure
    Ethernet
    FOX Board->
    HDMI
    IDE interface
    LCD
    Linux pre-loaded
    RS232
    RS422/RS485
    SD/MMC
    UEXT
    USB Device
    USB Host
    VGA
    Wireless
    Add-On Boards
  Books
  JTAG Debuggers->
  Programmers
  Software
  Starter & Evaluation Kits
Atmel AVR->
Cypress PSoC
Freescale->
FTDI->
Locktronics
Microchip PIC->
MIPS
Parallax->
Renesas
Silicon Labs
ST Microelectronics->
Texas Instruments->
Tibbo->
Books->
Displays->
E-Blocks->
EEPROM/EPROM/FLASH
Embedded Ethernet->
Embedded Software->
I/O Modules->
Parts & Components->
Pick & Place Tools
Programmable Logic (PLD)
Prototype PCBs->
Robotics
ROM/Flash Emulators
Test & Measurement->
Tutorial Software
Universal Programmers->
Wireless->
Information
Intro to Embedded Tools
Embedded News Digest
Useful Resources
Shipping & Returns
Warranty & Liability
Privacy Notice
Conditions of Use
Contact Us
ARM9 Automation Controller, 2x Ethernet, 2x USB Host, RS232/485 US$485.00

PAC-5070
ARM9 Automation Controller, 2x Ethernet, 2x USB Host, RS232/485

Linux-based Programmable Automation Controller

  • Pre-built Linux 2.6.x OS with file system
  • 180MHz ARM9 CPU, 64MB SDRAM and 16MB Flash
  • 4x 16-bit high-precision multiplexed analog inputs
  • 8x 2500Vrms opto-isolated digital inputs
  • 8x 500mA high-drive digital outputs
  • Two 10/100Mbps Ethernet ports
  • One RS-232 port, one RS-485 port
  • Two USB 2.0 host ports for add-on functionality expansion
  • One SD memory card slot included for storage expansion
  • GNU C/C++ tool chain for Linux/Windows environment
  • 9-40V DC input range

PAC-5070 Introduction

The PAC-5070 is a Linux-based, network-enabled and Web-ready programmable automation controller, with on-board 16-bit high precision analog inputs, opto-isolated digital inputs and 500mA high-drive digital outputs.

Open and standard programming environment

The PAC-5070 is a true Linux computing platform with file system support. Users can operate the PAC-5070 the same way as they do on a normal Linux desktop.

Open-source GNU Tool Chain, including C/C++ cross-compiler and POSIX standard C/C++ library, is bundled with the PAC-5070 for free.

Network enabled and Web ready

The PAC-5070 provides two 10/100Mbps Ethernet ports. A sophisticated Web server is pre-installed for users to implement applications which need Web-based remote monitor and controls. In addition, it is easy to add IEEE-802.11b/g WiFi support through the PAC-5070's USB 2.0 ports.

High-speed serial interface

Also, the PAC-5070 provides one RS-232 and one RS-485 serial port, running up to 921.6kbps. The RS-485 port supports hardware direction control.

On-board industrial digital I/Os

The PAC-5070 provides 8 channels of 2500Vrms opto-isolated digital input and 8 channels of 500mA high-drive digital outputs. Each input/output channel comes with a on/off status LED.

16-bit High-precision analog inputs

The PAC-5070 features an on-board 16-bit high-precision A/D converter, which can measure up to 4 channel of mV, V, or 0~20mA analog signals, up to 10 readings per second.

Optional 2GB SD Card for Data Storage

You can install one standard SD Flash memory card, up to 2GB, into the PAC-5070 as an additional hard drive.


Hardware Specifications

CPU/Memory

  • CPU: Atmel 180MHz AT91RM9200 (ARM9, w/MMU)
  • Memory: 64MB SDRAM, 16MB Flash

Network Interface

  • Two 10/100BaseT, RJ-45 connector

TTY (Serial) Ports

  • RS-485: one port, with screw-fixed wiring terminal Signals: Data+, Data-, GND
  • RS-232: one port, with 10P header Signals: Tx, Rx, RTS, CTS, DSR, DTR, DCD, GND
  • Console: one port, with 10P header Signals: Tx, Rx, GND

TTY (Serial) Port Parameters

  • Baud Rate: up to 921.6 Kbps
  • Parity: None, Even, Odd, Mark, Space
  • Data Bits: 5,6,7,8
  • Stop Bit: 1, 1.5, 2 bits
  • Flow Control: RTS/CTS, XON/XOFF, None

USB Host Ports

  • Two USB 2.0 compliant hosts, with 10P header
  • Data rate: up to 12Mbps

Mass Storage

  • One SD 1.0 compliant socket inside

General

  • Watchdog Timer: yes, for kernel use
  • Real Time Clock: yes
  • Buzzer: yes
  • Power input: 9~40V DC
  • Power consumption: 800mA @ 12V DC
  • Dimension: 160 x 104 x 32mm
  • Operation Temperature: 0 to 70C (32 to 158F)
  • Regulation: CE Class A, FCC Class A

Software Specifications

General

  • OS: Linux, kernel 2.6.x
  • Boot Loader: U-Boot 1.1.2
  • File Systems: JFFS2, ETX2/ETX3, VFAT/FAT, NFS

Protocol stacks

  • IPv4, ICMP, ARP, DHCP, NTP, TCP, UDP, FTP, Telnet, HTTP, PPP, PPPoE, CHAP, PAP, SMTP, SNMP V1/V2, SSL, SSH 1.0/2.0

Utilities

  • bash: shell command
  • tinylogin: login and user manager utility
  • telnet: Telnet client program
  • busybox: Linux utility collection
  • ftp: FTP client program

Daemon

  • pppd: Dial In/out over serial port and PPPoE
  • snmpd: SNMP agent program
  • telnetd: Telnet server program
  • inetd: TCP server program
  • ftpd: FTP server program
  • boa: Web server program
  • sshd: secured shell server
  • iptables: Firewall service manager
  • armd: Artila manager daemon

Tool Chain for Linux

  • GCC: C/C++ PC cross compiler for Linux, CygWin
  • GLIBC: POSIX Library

Device Drivers

  • SD/MMC, UART, Real Time Clock, Buzzer, Digital I/O, Ethernet, Watchdog Timer

USB Host Drivers (could be customized)

  • Flash disk
  • WiFi (IEEE-802.11b/g)
  • RS-232 adapters

Industrial Digital I/Os

Isolated Digital Input

  • No. of channels: 8
  • Logical high: 5 ~ 24V DC
  • Logical low: 0 ~ 1.5V DC
  • Input resistance: 1.2k Ohms @ 0.5W
  • Response time: 20us
  • Opto-isolation: 2500Vrms

500mA Digital Output

  • No. of channels: 8
  • Source driver: UDN2981A (Allegro)
  • Source voltage (VDD): 5~50V DC
  • Output current: 500mA max.

High-precision Analog Input

General

  • A/D converter: AD7712 (Analog Devices)
  • No. of channels: 4, multiplexed, 10 readings per second
  • Resolution: 16-bit
  • Accuracy: +/- 1%
  • Voltage input mode: differential, 100db CMR
  • Voltage input impedance: 20M Ohms
  • Current input impedance: 120 Ohms
  • Isolation protection: 1500V DC

Input range (selected in software)

  • 0~150mV, 0~500mV, +/-150mV, +/-500mV
  • 0~1V, 0~5V, 0~10V, +/-1V, +/-5V, +/-10V
  • 0~20mA

Download catalog and comparison of Artila product line


This product was added to our catalog on Saturday 21 August, 2010.

Reviews

Shopping Cart more
0 items
What's New? more
Flowcode 7 "Misc Pack A" Feature Pack
Flowcode 7 "Misc Pack A" Feature Pack
US$42.00
Specials more
USB Power Regulator Board, 3.3V & 5V Ref., 0.1" Pitch (USB Reg)
USB Power Regulator Board, 3.3V & 5V Ref., 0.1" Pitch (USB Reg)
US$6.00
US$4.00
Tell A Friend
 

Tell someone you know about this product.
Notifications more
NotificationsNotify me of updates to ARM9 Automation Controller, 2x Ethernet, 2x USB Host, RS232/485
Reviews more
Write ReviewWrite a review on this product!
  Monday 23 October, 2017   List of all our Products

Copyright © 2003-2017 MicroController Pros LLC
Powered by osCommerce