Prototype Board for LPC2129 ARM7TDMI-S Microcontroller with Dual CAN and RS232 Interfaces LPC2129 (ARM) Board Features - MCU: 16/32-bit ARM7TDMI-S with 256 kBytes Program Flash, 16 kBytes RAM, RTC, 4x 10-bit ADC 2.44 µS, 2x UARTs, 2x CAN, I2C, SPI, 2x 32-bit TIMERS, 7x CCR, 6x PWM, WDT, 5V tolerant I/O, up to 60 MHz operation
- 14.7456 MHz crystal
- Two-channel RS232 interface with two RS232 Sub-D 9-pin connectors
- Two-channel CAN interface with drivers (MCP2551) and two Sub-D 9-pin connectors
- JTAG connector as per ARM's 2x10 pin layout, ARM-JTAG Interface compatible
- iButton interface circuit
- Frequency input connector
- RESET circuit can be controlled externally by Philips ISP utility via RS232
- RESET button
- Two status LEDs
- Two buttons
- Potentiometer connected to analog input AIN0
- BSL jumper for bootloader enable
- DBG jumper for JTAG enable
- JRST jumper to enable external RESET control by RS232
- Single power supply: 7V to 9V DC required
- Power supply filtering capacitor
- Power supply status LED
- Three on-board voltage regulators 1.8V, 3.3V and 5V with up to 800mA current
- Extension headers for all µC ports
- PCB: FR-4, 1.5 mm (0.062"), green soldermask, white silkscreen component print
- Dimensions: 115 x 80 mm (4.5 x 3.2")
- Four mounting holes
LPC2129 (ARM) Board Resources LPC2129 Board Schematic OpenOCD + Eclipse set of projects 1.00 See the complete list of projects included here. This prototype board is a low-cost tool with limited support. It does not include any documentation other than that contained on this web page and does not ship with any software. Ships from: USA Leadtime: In stock
Optional Recommended Products for this Item
|