Note: This price is for 2 kits. The EM-LPC11C00 Blue Sprite Starter Kit is part of a series of comprehensive evaluation kits for NXP LPC1000-based ARM Cortex-M0/M3 microcontrollers. Each kit consists of an evaluation board and an attached Colink USB JTAG debugger. This one has an LPC11C14 microcontroller. Other kits in the Blue Sprite series are available with the following microcontrollers: LPC1114 (coming soon), LPC11U14 (coming soon), LPC1227, and LPC1343 (coming soon). The LPC11C14 ARM Cortex-M0 MCU operates at 50 MHz. The base board part of the starter kit has LPCXpresso-compatible GPIO header pads, so you can use it with an LPCXpresso Baseboard. Besides supporting UART in RS485 mode, the LPC11C00 provides an 8-channel 10-bit ADC, two 16-bit timers, two 32-bit timers, and plenty of peripheral functions such as CAN 2.0, SSP, I2C and a Power Management Unit. This starter kit is a good Cortex-M0 development platform for learning and project evaluation. The on-board Colink is a very smart debugging adapter which can be used in MDK, IAR, etc. The Colink supports download, debugging, trace, etc. Plenty of source code on the included CD-ROM will help you to start using the board as a short time. This kit includes a Colink JTAG programmer/debugger attached to the side, as pictured. The Colink connects to your PC via a mini-USB cable which is included in the kit. It also has a 2x5-pin SWD interface so you can use an external debugger.  LPC11C14 Starter Kit Features - LPC11C14 32-bit processor, ARM Cortex-M0, 50 MHz
- Power indicator LED
- Mini-USB connector (can be used for power as well as programming)
- RESET button
- UART interface supporting RS485/EIA-485
- SSP interface
- I2C interface
- 8-channel, 10-bit ADC interface
- JTAG/SWD interface
LPC11C14 Starter Kit Software The following demo code is included with this kit. | Name | Description | | Blinky | LED blinking | | GPIO | GPIO interface interrupt trigger | | PMU | Power Management Unit sleep and deep-sleep modes | | SysTick | LED blinking via system time delay | | Timer32 | LED blinking via 32-bit timer delay | | WDT | Watchdog Timer application example | | SSP | SSP synchronous serial communication | | UART | Send/accept character via UART interface | | Temperature Sensor | Read the sensor data through I2C | | CAN | CAN communication test | | USB device | USB Device driver (not supported by LPC11C14) | LPC11C14 Starter Kit Contents As these kits are sold in pairs, you will receive two each of the following: - LPC11C00 Development Board with JTAG Board attached
- JTAG 20-pin to 10-pin Conversion Cable
- Mini-USB cable
- Serial cable
- CD-ROM with software, schematics and documentation
LPC11C14 Starter Kit Resources Ships from: China
Lead time: 4 weeks Note: These kits are sold in pairs. Each quantity you order equals two kits, i.e. order Qty 2 and you will receive 4 kits.
|
