LPC2106 Board Features

• MCU: 16/32-bit LPC2106 with 128 kBytes Program Flash, 64 kBytes RAM, RTC, 2x UARTs, I2C, SPI, 2x 32-bit Timers, 7x CCR, 6x PWM, WDT, 5V tolerant I/O, up to 60 MHz operation
• 14.7456 MHz crystal (4x PLL = 58.9824 MHz CPU clock)
• JTAG connector as per ARM's 2x10-pin layout, ARM-JTAG (Wiggler) Interface compatible
• RS232 interface circuit
• RESET circuit and button
• Pushbutton with pull-up
• Status LED
• Bootloader Enable jumper and pull-up
• DBGSEL, RTCK pull-up resistors
• Single power supply: +5 to 9V DC required
• Two on-board voltage regulators 1.8V and 3.3V with up to 800mA current
• Power supply filtering capacitor
• Prototype PCB area with +3.3V and GND bus
• Extension header for uC pins
• Power plug-in jack
• PCB: FR-4, 1.5 mm (0.062"), green soldermask, white silkscreen component print
• Dimensions: 100 x 77 mm (3.9 x 3.05")
• Four mounting holes

LPC2106 Board Resources

• LPC2106 Board Schematic
• LPC2106 Board Documentation (Windows Help CHM file; 199kB)
• Demo code for Button and LED (ZIP file; 36kB)
• RS232 UART demo code (ZIP file; 33kB)
• OpenOCD + Eclipse set of projects 1.00 See the complete list of projects included here.

This prototype board is a low-cost tool with limited support. It does not include any documentation other than that contained on this web page and does not ship with any software.

Ships from: USA
Leadtime: In stock