This is a Programming Adapter for the SuperPro 6100 and SuperPro 6104GP Universal Chip Programmers. It supports 48-pin TSOP devices with 0.5mm pitch and 18.4mm body width. Check the Supported Devices List of your programmer to make sure this is the correct adapter for the device you want to program.
NOTE: If the Supported Devices List shows DX1004-x as the adapter for your device, using this adapter may cause programming errors. The variants have different capacitors on board to ensure programming reliability for particular devices. We don't list the variants separately as few devices require them. If you need one of those variants, please call us to make sure we get you get the right adapter.
|Specs || |
|Socket ||TSOP Package, 48-Pin |
|Socket Life Cycle ||10,000 Insertions |
|Socket Type ||Open Top |
|Socket Size ||20 × 28 mm |
|Pin Spacing (Pitch) ||0.5 mm |
|Package Width Min. ||19.2 mm |
|Package Width Max. ||20 mm |
|Body Width ||18.4 mm |
48-Pin TSOP Programming Adapter Device Insertion Instructions
- Remove the default DIP48 socket adapter (DX0001) from the top of the programmer and insert this socket adapter into the SuperPro6100 series programmer adapter holder.
- Press and hold the top of the socket before placing a chip inside.
- Use a vacuum pick-up tool (recommended) to place the chip in the socket, aligning pin 1 of the chip as illustrated in the adapter information box of the programming software.
- Release your hold of the socket and begin programming.
- When finished programming, gently remove the chip by again pressing down the socket and using a vacuum pick-up tool.
Lead time: 2 days