USB 2.0 and USB 1.1 compatible Dual channel with 150 MHz bandwidth Deflection factor: 10mV/div to 5V/div in 1-2-5 sequence Max real-time sampling rate 200 MS/s Max equivalent sampling rate 20 GS/s Software for Windows 98SE, Windows ME, Windows 2000, Windows XP and Windows Vista
This kit includes the M525 Dual-Channel Digital Storage Scope with Roll Mode software license, probes, and a carrying case. The M525 is compatible with USB 2.0 and USB 1.1 interface. It is connected to a computer using standard USB 2.0 cable and is powered via USB. The maximum power consumption is 2.25W, making this instrument usable with battery-powered notebooks.
The device has a metal casing which can withstand rough manipulation and is fully recyclable.
The M525 offers precise electronic engineering and automated calibration processes during manufacturing. Each kit contains a traceable calibration certificate. Since the M525 device uses USB 2.0 for communication (with automatic fallback to USB 1.1), it provides you with high refresh rates comparable to stand-alone devices.
The time base in 1:1 display mode (no zoom) is settable from 2ns/div to 100ms/div in sequence of 1-2-5. It is possible to set the time base from 200ps/div to 800ms/div using different zoom settings.
Software The basic package contains complex yet easy-to-use oscilloscope software (Scope). Scope allows you to control the oscilloscope, use advanced functions (such as FFT, persistent display mode, mask testing) or export the data. The Spectrum Analyzer software is the part of the basic package as well.
This kit also includes a license for Roll Mode software, which allows you to acquire data as fast as 5MS/s and store them directly to the hard drive. You can use either the viewer to analyze the data, or export tools to analyze data in third-party applications.
Support ETC provides unlimited tech support, and software updates also are free of charge always.
M520 Series Comparison Table Other kits with M520 series scopes are available. The main differences between the models are shown below.
|Model ||Bandwidth ||Max. Sample Rate ||Max. RIS Sample Rate ||Timebase range ||Memory |
|M521||60 MHz||50 MS/s||5 GS/s||1ns/d to 800ms/d||4K |
|M522||60 MHz||50 MS/s||5 GS/s||1ns/d to 1.6s/d||8K |
|M523||120 MHz||100 MS/s||10 GS/s||500ps/d to 800ms/d||4K |
|M524||120 MHz||100 MS/s||10 GS/s||500ps/d to 1.6s/d||8K |
|M525||150 MHz||200 MS/s||20 GS/s||200ps/d to 800ms/d||4K |
|M526||150 MHz||200 MS/s||20 GS/s||200ps/d to 1.6s/d||8K |
150MHz Digital Storage Oscilloscope Kit Contents
- M525/RM 150MHz digital storage oscilloscope with Roll Mode
- USB 2.0 cable, 1.8m
- Two 200MHz/1:1:10 switchable oscilloscope probes, 1.2m
- CD-ROM with software and user's guide
- Quick Start Guide, Warning leaflets, Calibration certificate, and Certificate of conformance
M525 Oscilloscope Specifications
|Vertical deflection system |
|No. of divisions ||8 |
|No. of pixels per division ||32 |
|Deflection factor range ||10mV/div to 5V/div in 1-2-5 sequence |
|Accuracy ||±2% of current value + 1 pixel |
|Resolution ||8 bits (0.39%) |
|Frequency response (-3dB) ||DC 0-150 MHz, AC 1.2 Hz to 150 MHz |
|Step response rise time ||max. 2.4 ns |
|Channel isolation ||min. –60 dB |
|Resistance ||1 MΩ +5%, -2% |
|Input resistance inaccuracy adjustment ||Digital for absolute accuracy ±2% of current voltage + 1 pixel |
|Capacitance ||30 pF ±2 pF |
|Zero setting accuracy ||±2% of the screen |
|Maximum input voltage ||±200V at 100 kHz or less |
|System type ||Dual level |
|Trigger source for primary level ||Selectable Channel A, Channel B or external trigger input |
|Trigger source for secondary level ||Selectable Channel A, Channel B or external trigger input |
|Threshold setting ||Channel A and Channel B on the whole display range. External fixed on about 1.5V |
|Slope selection ||Leading or trailing edge independently on each source |
|Minimum trigger pulse period ||5 ns |
|Minimum trigger pulse length ||2.5 ns |
|Maximum voltage on external trigger input ||–10V to +13V at 20 kHz or less |
|Adjustments ||Digital filter with valid pulse length settable up to 131072*Ts for each level and counter of valid triggering events settable from 1 to 32768 for each level. HOLD-OFF settable up to 131072*Ts with selectable AUTO mode, to sample proper amount of data before trigger. (Ts – actual real-time sampling period.) |
|Data acquisition system |
|No. of divisions ||10 |
|No. of pixels per division ||40 |
|Mode of operation ||Sampling before and after trigger with continual selection of the trigger position |
|Record length ||4096 samples for each channel |
|Time base range in 1:1 mode ||2 ns/d to 100 ms/d in 1-2-5 sequence |
|Time base range using different ZOOM modes ||200 ps/d to 800 ms/d |
|Time base accuracy ||0.01% to 100ns/d, 0.5% for 50ns/d to 5ns/d |
|Real-time sampling frequency ||1 kHz to 200 MHz |
|Equivalent sampling frequency ||1 kHz to 20 GHz |
|Display range with respect to trigger event ||4094 samples before and 63000 samples after trig. event in length of 4096 samples |
|Probe compensation generator |
|Output connector ||BNC, together with External trigger input |
|Output impedance ||1kΩ to parallel with 10nF and approx. 50Ω serial |
|Output waveform ||Pulse with 1:1 duty cycle |
|Frequency ||1465 Hz |
|Output voltage (no load) ||3.3V ±5% |
|Power source ||USB interface via USB cable |
|Max. current ||USB1.1: 350 mA, USB2.0: 450 mA |
|Mechanical characteristics |
|Dimensions without feet and connectors ||165 × 111 × 35 mm |
|Dimensions with feet and connectors ||182 × 111 × 39 mm |
|Weight ||520 g |
150MHz Digital Storage Oscilloscope Kit Documentation
Optional Development API The Development Kit is an API allowing you to add control functions for the scope in your own software applications. It works in Windows 98SE, Me, 2000, XP and Vista. It comes with descriptions and examples of all libraries written in Inprise Delphi, Inprise C++ Builder, Visual C++ 6.0, Visual Basic 6.0, C# .NET and Visual Basic .NET.
Country of Origin: Slovak Republic Lead time: 1 week
Optional Recommended Products for this Item