The MBS-SAM9G45 is an ARM9 embedded system produced by Embest, integrating the Atmel AT91SAM9G45 processor operating at 400 MHz. The MBS-SAM9G45 consists of the MBC-SAM9G45 core board plugged into the MBM-SAM-9G motherboard. The MBS-SAM9G45 core board contains a Micro-USB interface for easily uploading firmware, plus a debug serial port, a 5V power supply interface, two 32MB SDRAM memory chips, a 4MB DataFlash, and a 256MB NandFlash. The MBM-SAM-9G motherboard has rich peripheral resources, such as SD Card interface, audio interface, Ethernet, 2x USB Host, a UART, a JTAG debug port, LCD interface, CAN interface (not supported by this CPU), and more.
The CPU module comes with Linux 2.6 pre-installed. A CD-ROM is provided with WinCE6.0 BSP which you can install optionally. Source code of both Linux and WinCE packages and drivers are included as well. You can download Android BSP below.
This board can be purchased with a touchscreen LCD. Use the option selector at the bottom of this page to choose between three different sizes.
User Interface Header Pinout (J14)
|Description ||Channels ||Pins |
|UART (TTL Level)||2||9, 10; 11, 12 |
|IIC Signal||1||5, 6 |
|SPI||1||17, 18, 19, 20 |
|PWM||2||23; 24 |
|User Interrupt||2||25; 26 |
|DC 5V||2||1; 2 |
|DC 3.3V||2||29; 30 |
|Power Management Status (SHDN & WKUP)||2||15; 16 |
AT91SAM9G45 System Software
- Linux 2.6.30 core source code and driver source code
- GCC cross compiler tools
- Compiler version: arm-none-linux-gnueabi-
- Supports booting from Nand Flash
- Supports core and file system download and writing via Nand Flash and internet
- File system: ROM/CRAM/EXT2/EXT3/FAT/NTF/JFFS2/YAFFS2, etc.
- Drivers: Serial Port, RTC Clock, 10/100 Ethernet, Nand Flash, TFT LCD, Touch Screen Controller, ADS7843, USB Host, USB Device, GPIO, Watchdog, Audio, SD card
- Also includes WinCE 6.0 BSP source code package and driver source code
AT91SAM9G45 System Resources
AT91SAM9G45 System Package Contents
- MBS-SAM9G45 System (CPU board and motherboard)
- RS232 serial cable, DB9F to DB9M, 1-to-1 wired
- USB cable, standard A-B
- Ethernet Crossover cable
- 5V power supply
- CD-ROM with software, tools, images, source code and documentation
- Optional LCD with touchscreen (if selected below)
Ships from: China
Lead time: 1 week